Availability
Availability and dispatch timing are confirmed in the quotation after we review your model and installation photos. Send the quantity and destination with your request.
Controller
PC100A Web Guiding Controller
PC100A is a touchscreen web guiding controller for edge guiding, line guiding, center guiding and position correction applications. It provides an operator-friendly interface for web guiding systems used in converting, printing and web handling equipment.
Replacement & Spare Part
Replacing a PC100A on an existing machine?
PC100A is a 4.3-inch touchscreen controller with ES and CCD sensor configurations. Replacement selection depends on the installed sensor, actuator and mounting arrangement.
What to send us
Send the controller nameplate and terminal photos, sensor and actuator model numbers, panel opening dimensions, guiding mode and quantity required. A photo of the wiring terminals helps us confirm the connection.
What ships
The quoted PC100A controller configuration. Confirm the mounting arrangement and whether sensors, actuators or cables are needed; those items must be listed separately in the quotation.
Compare panel dimensions, mounting style, supply and actuator connections, and ES or CCD sensor configuration before ordering. Touchscreen appearance alone does not establish compatibility.
Dimension drawing: request it for comparison with the installed unit before ordering.
Wiring diagram: request the diagram for the confirmed model and connection before installation.
Commonly reported PC100A symptoms
The web hunts from side to side
Usually caused by gain set too high or a sensor mounted in the wrong place, not by a failed controller. Send the sensor position in relation to the rollers.
Guiding holds, but off-centre
The reference or centre point needs resetting. This is a set-up step, not a fault.
The screen will not start
PC100A runs on 36 V. Check the supply at the controller terminals before treating it as a failed controller, and send a photo of the nameplate and terminals.
Key Features
Touchscreen operation for web guiding control applications.
- Supports EPC edge guiding, LPC line guiding, CPC center guiding and SPC stagger correction operation.
- Works with ultrasonic, infrared and CCD sensor configurations.
- 4.3-inch full-color touch screen with full-touch operation.
- Bilingual Chinese and English interface for machine operation.
- Setup wizard and page-level help menu for faster parameter setting.
- Supports embedded, wall-fixed and integrated installation.
- Used with matching web guiding sensors, actuators and correction structures according to machine configuration.
Guiding Mode Options
EPC is used for edge position control, LPC for printed line tracking, CPC for center position control, and SPC for stagger correction applications.
| Model | PC100A |
|---|---|
| Power Supply | 36 V |
| Product Type | Touchscreen web guiding controller |
| Display | 4.3-inch full-color touch screen |
| Operation | Full-touch operation |
| Interface | Chinese and English bilingual interface |
| Guiding Modes | EPC, LPC, CPC and SPC correction operation |
| Sensor Match | ES tracking sensors and CCD tracking sensors |
| Installation | Embedded, wall-fixed or integrated installation |
Controller Interface
PC100A full-touch controller
The PC100A touchscreen controller provides the human-machine interface for displaying correction status, adjusting parameters and operating the web guiding system.
Touch Interface
4.3-inch full-color touch screen with bilingual Chinese and English interface, setup wizard and page-level help menu.
Installation
Supports embedded, wall-fixed and integrated installation depending on the machine layout.
Sensor Match
Single-wire mode supports ES tracking sensors. Double-wire mode supports CCD tracking sensors and remains compatible with ES sensors.
Compatible Components
ES100 Ultrasonic Sensor
Ultrasonic edge sensing for transparent or low-contrast web materials.
View ModelES201 Infrared Sensor
Infrared edge sensing for opaque web materials and dusty production environments.
View ModelCCD Series Digital Sensor
Digital photoelectric / image sensing for printed lines, color contrast edges and difficult web edges.
View ModelACT01 / ACT03 Servo Actuator
Servo actuator options for standard or heavier correction requirements.
View ModelTypical Applications
Label Printing Lines
Touchscreen operation for web guiding control in label printing and finishing equipment.
Flexible Packaging Machines
Web position control for film, packaging and laminating processes.
Slitter Rewinders
Guiding control for unwind, infeed and rewind sections.
Coating & Laminating Lines
Operator-friendly web guiding control for coating, laminating and composite material processing.
FAQ
When is PC100A a good controller choice?
PC100A is useful when the machine needs touchscreen operation, easier parameter setup, bilingual interface support or compatibility with ES and CCD sensor configurations.
Which guiding modes can be reviewed for PC100A?
PC100A can be reviewed for edge guiding, printed-line guiding, center guiding and position correction, depending on the selected sensor, actuator and frame.
What should OEM machine builders confirm?
Confirm panel mounting style, power supply, sensor type, actuator interface, communication needs, guiding mode and the machine section where correction will be installed.
Can PC100A be used for retrofit projects?
Yes, but the retrofit should be checked against existing panel space, cable routing, actuator travel, sensor mounting position and available correction frame structure.